社长室内的秘书妻子,极品夜夜嗨久久精品17c,侯府嫡女高ah 笔趣阁,爱丫爱丫在线影院观看

TEL:022-24390723  Enterprise mailbox entry

YK2232 CNC Spiral Bevel Gear Generator

PRODUCT CENTER > Spiral Bevel Gear Cutting Machines > YK2232 CNC Spiral Bevel Gear Generator

YK2232 CNC Spiral Bevel Gear Generator

YK2232 CNC SPIRAL BEVEL GEAR GENERATOR

 

Ⅰ. Applications of the Machine

The YK2232 machine is a CNC spiral bevel gear generator designed to cut spiral bevel gears and hypoid gears of diameter up to 320mm and module up to 6mm. The machine is suitable for machining of fine pitch spiral bevel gear pairs used on light-duty vehicles, motor bikes, off-road vehicles and quad bikes.

This machine is a general-purpose machine used for roughing or finishing the pinions and gears. The machining accuracy is up to Grade 6 (GB/T11365-89).

Ⅱ. Features of the Machine

This machine is a 3-axis CNC spiral bevel gear generator. The three-axis CNC controlled movements are the cradle movement (X-axis), the work spindle movement (Y-axis) and the sliding base movement (Z-axis). A SIEMENS 828D CNC control system is adopted on the machine, which is capable for three-axis simultaneous movements of the machine.

The main motion of the cutter is driven by means of a frequency-variable motor, and stepless speed regulation is possible. No change gears are required for the machine adjustments. This shortens the set-up time and simplifies the machine operation, thus increasing the productivity of the machine.

Ⅲ. Parameters of Motors

AC frequency-variable motor for the main drive

3KW

Hydraulic motor

1.47KW

Servo motor  cradle

3.2KW

Coolant motor

150W

Servo motor  workhead

3.2KW

Chip conveyor motor

100W

Servo motor  sliding base

3.2KW

Total capacity of machine

15KVA

Ⅳ. Technical Specifications of the Machine

1. Work to be Machined

Max. module

mm

6

Teeth number


5~100

Extreme ratio


10:1

Max. cutting depth

mm

18

Max. face width

mm

40

Max. pitch diameter

mm

320

Root angle


Maximum 90°

Minimum 0~8°

2. Work Spindle

Diameter of taper hole at large end

mm

80

Taper


1:20

Diameter of through hole

mm

45

Diameter of spindle end

mm

130

3. Cutter Diameter


6〃、71/2〃、9

4. Workhead Setup

Max. offset

mm

±55

Machine center to spindle nose

mm

40~260

5. Cutter Setup

Cutter speed (2 steps)

rpm

50~150

Feed

sec./tooth

6~60

6. Position of sliding Base

Max. displacement from center

mm

Forward 30

Backward 120

7. Net Weight

t

Appr.6

8.Overall Dimensions (L×W×H)

mm

1800×1490×1725

 


主站蜘蛛池模板: 弥勒县| 阿尔山市| 平陆县| 浪卡子县| 佛教| 大丰市| 通州区| 新竹县| 汤阴县| 汶川县| 巴塘县| 南江县| 韶关市| 平原县| 阜阳市| 五原县| 平陆县| 九寨沟县| 奉化市| 永寿县| 绍兴县| 永靖县| 休宁县| 嵩明县| 台安县| 文昌市| 邯郸市| 沁阳市| 渝中区| 宁安市| 廉江市| 定西市| 宿迁市| 信宜市| 青河县| 奉贤区| 荔浦县| 新竹市| 青冈县| 永吉县| 茶陵县|